Residual heat regeneration compressed air dryer is a high temperature gasdischarged by the air compressor heat is directly used for heating the desiccant,the sorbent thoroughly regeneration. Avoid no heat regeneration dryer regenerationloss big disadvantage of gas, but also overcome the disadvantages of heatregeneration dryer electric energy consumption of large. Residual heat regenerationwithout gas consumption, make full use of its own energy, low energy consumptionof compressed air dryer heating regeneration, is a new type of energy saving airdrying equipment.
L product gas dew point is stable and reliable, regeneration and less gas consumption, low energy consumption;
L the humanization design, reasonable structure, convenient operation and maintenance;
L using the process program of advanced and reasonable control, switching cycle is long, stable and reliable operation;
- heating regeneration using compressed air energy, energy saving and high efficiency;
L high performance switching valve, accurate and quick and reliable;
L optional dew point control function, saving energy maximum;
L optional RS485/RS232 communication interface and linked control function.
And treatment capacity: 20 ~ 600Nm3/min, the intake air temperature: 120 to 220 DEG C
And the finished product gas dew point: the temperature of -40 DEG C, cooling water temperature: 32 degrees
And working pressure: 0.60 ~ 11.6Mpa, cooling water pressure: 0.25 ~ 0.4MPa
And the regeneration gas consumption: 1% ~ 1.5%, the adsorption cycle: 6 ~ 8h or optional dew point control
Process flow diagram: